In-Screed Floor Heating Cable - 200W per SQM - mat only - ideal for BATHROOMS

• Suitable for installation below ceramic tiles, stone, marble and vinyl plank floors
• 500mm wide with self-adhesive backing
• 200W per SQM ideally suited to bathrooms
• Must be used in conjunction with thermostat controller
• 10 year warranty on cable
• Cable cannot be cut, but the matting can be, to allow you to turn a corner or reverse direction
• NOTE This product can be DIY installed but must be commissioned (connected) by a licensed electrical contractor and connected to a Thermostat & an RCD to comply with current AS/NZS 3000 wiring regulations.

We highly recommend you purchase the complete KIT, which will include the thermostat, cable alarm, floor sensor & cloth tape. Refer to out KIT section 

Purchase a mat to cover your 'free floor' area only i.e. do not include area under sink, toilet, vanity etc.

Mat Size - m2 Typical Floor Coverage - 'free floor' area only  Mat length - linear m x 500mm

• 1: 1.1-1.5m2 length 2m
• 1.5: 2.0 - 2.4m2 length3m
• 2: 2.5 - 2.9m2 length 4m
• 2.5: 3.0 - 3.4m2 length 5m
• 3: 3.5 - 4.4m2 length 6m
• 4: 4.5 - 5.5m2 length 8m
• 5: 5.6 - 6.5m2 length10m
• 6: 6.6 - 7.5m2 length12m
• 7: 7.6 - 8.5m2 length 14m
• 8: 8.6 - 9.5m2 length16m
• 10: 10.6 - 11.5m2 length 20m
• 11: 11.6 - 12.5m2 length 22m
• 12: 12.6 - 13.5m2 length 24m