Welcome to Trade Warehouse

Trade and Public Welcome

In-Screed for Bathrooms

In-Screed for Bathrooms

**NEW PRODUCT**

In-Screed Kits - Trade Warehouse are the first company to offer this unique pre-laid system for in-screed installation - the only product of its type in Australia

    • Bathrooms - 200W per sqm
    • Living Areas - 150W per sqm
An Australian first product from RADIANT of In-Screed Kits - the cable is pre attached to a mat in a similar fashion to the Under-Tile Kit.
This unique product removes a lot of the hassle during installation as the heating cable is pre-spaced on the mat - providing an easy way of laying the cable in-screed.
 
Heat your tiles quickly & efficiently - just what is required so your bathroom is warm when you get up in the morning.
This product is also suitable to use under vinyl planks
 
Each thermostat can cover up to 23sqm - BATHROOMS KITS come in sizes up to 8mselect the kit size to cover your 'free floor' area only i.e. do not include area under sink, toilet, vanity etc. and 100mm away from walls
 
NOTE This product can be DIY installed but must be commissioned (connected) by a licensed electrical contractor & connected to a Thermostat & an RCD to comply with current AS/NZS 3000 wiring regulations.

If you have a wooden sub-floor you will need to lay tile backer board prior to installation of the cable mats - please visit our floor insulation section

DIY In Screed Floor Heating Kits for Bathroom

5 Item(s)