An Australian first product from RADIANT Australia DV30 In Slab 30W per linear metre - 200W per sqm- for the PROFESSIONAL installer, bathroom renovator or builder

Professional In-Slab floor heating CABLE ONLY is perfect for floor heating the slab in required areas

The cable is installed IN-SLAB, meaning that the tiler has no need to worry about working over the cable

This is a professional 'cable only', which comes loose on a drum.  A thermostat is required to control the floor-heating and can be purchased separately

This is a popular solution for experienced fitters of in-slab systems.

Heat your tiles quickly & efficiently at 200W per sqm, just what is required so your bathroom is warm when you get up in the morning.

NOTE This product must be commissioned (connected) by a licensed electrical contractor & connected to a Thermostat & an RCD to comply with current AS/NZS 3000 wiring regulations.
10 year warranty on cable
Cable cannot be cut - purchase the correct cable length - see table below

Linear M: Typical Floor Coverage

• 33.3m: 6.66m2
• 46.6m: 9.33m2
• 67m: 13.3m2
• 83.3m: 16.6m2
• 129m: 26m2