IN STOCK | |
VIC: | DISPATCH IN 3-4D |
---|---|
WA: | YES |
An Australian first product from RADIANT Australia DV30 In Slab 30W per linear metre - 200W per sqm- for the PROFESSIONAL installer, bathroom renovator or builder
Professional In-Slab floor heating CABLE ONLY is perfect for floor heating the slab in required areas
The cable is installed IN-SLAB, meaning that the tiler has no need to worry about working over the cable
This is a professional 'cable only', which comes loose on a drum. A thermostat is required to control the floor-heating and can be purchased separately
This is a popular solution for experienced fitters of in-slab systems.
Heat your tiles quickly & efficiently at 200W per sqm, just what is required so your bathroom is warm when you get up in the morning.
NOTE This product must be commissioned (connected) by a licensed electrical contractor & connected to a Thermostat & an RCD to comply with current AS/NZS 3000 wiring regulations.
10 year warranty on cable
Cable cannot be cut - purchase the correct cable length - see table below
Linear M: Typical Floor Coverage
Item Code | SL1400 |
---|---|
Manufacturer | Radiant Australia |
Type | In-Slab |
Format | Cable Only |
Watts Per Sqm | 200 W/sqm (for Bathrooms) |
Coverage | 9.33sqm |
Cable Length | 46.6 |
Electrical Requirements | 1400W / 6.1A |
bulky surcharges may apply
from our VIC/WA warehouses